Laden...Even geduld aub...

Onze nieuwsbrief


3D instelling voor de film avatar voor panasonic 3d tv. Veel plezier

Geplaatst op 23rd Feb 2011 @ 7:57 PM

Make the settings after inserting the AVATAR Blu-ray 3D Disc into the player.

Set the TV picture quality.
1.
Press the Menu button on the remote control.
Select "Setup" using the under button, and then press the OK button.
2.
Switch "Advance (isfccc)" to ON using the right button.
Return to the "Main Menu" by pressing the RETURN button.
3.
Press the OK button to advance to the "Picture Menu."
4.
Make the following settings using the right button.
Set the "Viewing Mode" to "Professional 1"
Set the "Contrast" to "48."
Set the "Colour" to "33."

Advance to page 2/2 using the under button after changing the settings.
Select "Advanced Settings" and press the OK button.

5.
Press the OK button to advance to "White Balance."
6.

Make the following settings using the left or right button.
• Move the scale of "R-Gain" 10 times to the right. (Press right 10 times)
• Move the scale of "G-Gain" 8 times to the left. (Press left 8 times)
• Move the scale of "R-Cutoff" 2 times to the right. (Press right 2 times)
• Move the scale of "B-Cutoff" 1 time to the right. (Press right 1 time)

Press the RETURN button to return to the "Advanced Settings" after changing the settings.

7.
Select "Colour Management" using the under button, and press the OK button.
8.

Make the following settings using the left or right buttons.
• Move the scale of "R-Hue" 3 times to the right. (Press right 3 times)
• Move the scale of "G-Hue" 4 times to the left. (Press left 4 times)
• Move the scale of "R-Saturation" 3 times to the right. (Press right 3 times)
• Move the scale of "G-Saturation" 11 times to the right. (Press right 11 times)
• Move the scale of "B-Saturation" 8 times to the right. (Press right 8 times)

Press the RETURN button to return to the "Advanced Settings" after changing the settings.

9.
Select "Gamma" using the under button, and press the OK button.
10.
Set "Gamma" to "2.4" using the left button.
Press the RETURN button twice to return to the "Main Menu" after changing the setting.
11.
Select "Setup" using the under button, and press the OK button.

Select "Other Settings" using the under button, and press the OK button.

12.
Use the left button to switch "24p Smooth Film" to OFF.
Use the left button to switch "3D 24p Film Display" to OFF.
* This setup is not available depending on the model.